Forum Navigation
You need to log in to create posts and topics.
Post History: bykima5230416a7
One more thing...
The integration in surface monitor means surface integral, not time integral. S …In: Tracking object displacement (dynamic mesh - rigid body dynamic)
4 days ago
Hi,
Currently, there’s no way to monitor displacement in Baram. We hadn’t thought of that. When y …In: Tracking object displacement (dynamic mesh - rigid body dynamic)
4 days ago
Dear Miguel AGUIRRE,
The AMR approach we’re considering uses the `dynamicRefineFvMesh` library fr …In: AMR capabilities
2 weeks ago
Hello,
You can select No Slip or Slip in boundary condition setup window.
If the boundary is m …In: Dynamic mesh: no slip condition
2 weeks ago
BARAM uses wall functions in the SST k-omega model. k uses kqRWallFunction, omega uses omegaBlendedW …In: Preferred y+ for k-epsilon two layer model?
3 weeks ago
Adding the cfMesh feature to baram is on our development backlog. However, it has been pushed down t …In: CFMesh support/GUI in BARAM
1 month ago
Dear,
inquiry 3 : I understand what you mean. It would be necessary when it's a transient. …In: Conjugate Heat Transfer Questions
1 month ago
Thank you for the detailed explanation. I understand what you mean. I will take this into account in …In: Reports and PostProcessing options/features
1 month ago
Dear,
This has been logged as a development issue, but it is not yet supported in Baram. We plan …In: Time based pressure boundary condition
1 month ago
Dear Ben watton,
Thank you for your various suggestions. It seems that the points you mentioned a …In: Reports and PostProcessing options/features
1 month ago
Dear TFH,
for the initialization : As you mentioned, it wouldn't be a bad idea to provide …In: Conjugate Heat Transfer Questions
1 month ago
Hi Kunal Bhatia,
I tested fluent msh file convert in baramFlow.
When converting fluent msh fil …In: Mesh Import Issues
1 month ago
Dear TFH,
About inquiry 1.
Currently, the coupled boundary for a thermo-coupled wall must be s …In: Conjugate Heat Transfer Questions
1 month ago
Hi,
In baram v26.x, when a new mesh is loaded in baramFlow, the boundary conditions, cell zone co …In: Mesh update in BaramFlow
2 months ago
Unless there are special circumstances, I do not recommend using the y+ < 1 condition in the SST …In: Preferred y+ for k-epsilon two layer model?
2 months ago
It's hard to say exactly what's causing the issue you mentioned. It doesn't seem to b …In: 3d vof tank fill convergence issue
2 months ago
Dear Tom Kindl,
When you load a new mesh in baramFlow, the cell zone conditions and boundary cond …In: Mesh update in BaramFlow
2 months ago
Dear Tom,
When using an adaptive time step, the time step size increases if the velocity decrease …In: 3d vof tank fill convergence issue
2 months ago
Dear LV,
A value of y+ greater than 30 is recommended. Since y+ is a function of velocity, it is …In: Preferred y+ for k-epsilon two layer model?
2 months ago
If you click “Start Calculation” after the calculation has finished, the calculation will start from …In: How to run calculation from last time step?
2 months ago
It appears that vortex shedding is occurring. This is a problem where the flow field in the wake con …In: Analysis not converging
3 months ago
Dear Yashral Randad,
If you look at the first figure you posted, it’s not that there’s no velocit …In: Spatial distribution of velocity at inlet
3 months ago
I’m attaching an example case with open channel inlet boundary conditions in case it’s helpful. It’s …In: Strange behavior with open channel inlet BC
4 months ago
Dear Al Kik,
It doesn't seem to be a software bug; rather, there appears to be an issue with …In: Strange behavior with open channel inlet BC
4 months ago
Dear Yashraj,
Looking at the video you sent, I see that for the “alpha.SlurryLiquid” field in the …In: Inlet not spawning Volume Fraction
4 months ago
Looking at the log you posted, it appears the simulation diverged. Given that the volume fraction wa …In: BaramFlow: Advanced sections in Initialisation not showing/working
5 months ago
We have identified the issue. A bug occurred in v25.1 when determining the initial value for turbule …In: No convergence of simulation
6 months ago
It appears that the initial conditions are being displayed because the “Time” value in Paraview is 0 …In: Constant value of velocity/pressure across entire domain
6 months ago
There seems to have been an issue with the tutorial case.
If you change the turbulent viscosity rat …In: No convergence of simulation
6 months ago
The arrow in the upper right corner of the configuration window for castellation, snap, and boundary …In: Reset the baramMesh settings to default value
7 months ago
When tested a simple case on macOS, the same problem occurred. We'll look into what the problem …In: Curvature refinement
7 months ago
Curvature refinement works fine on Linux and Windows.
We should check if there's an issue on m …In: Curvature refinement
7 months ago
Prt for internal field is set to constant/turbulenceProperties file.
Prt for wall function is set …In: Two turbulent Prandtl Number
7 months ago
You can only check the number of meshes and minimum/maximum volume in the mesh-info menu.
It seem …In: checkMesh
8 months ago
Yes, it is a program bug. There was an error when calculating the aerodynamic coefficient from the R …In: Some problem with ROM Evaluation
8 months ago
'Quantities to evaluate' are not used to add sampling conditions. They are only used to di …In: ROM model enhancement
8 months ago
Within the case folder, there is a folder named case/postProcessing containing folders for each moni …In: how to get monitoring data?
9 months ago