v23.3 – BARAM Portal

23.3.5

[Mesh] Crossing lines between Hex6 far-end boundary and other geometries are classified as feature edges
[Flow] Relative pressure is shown in monitoring chart rather than absolute pressure
[Mesh] Surface for cell zones are configured as internal type to make mesh conform the surface
[Flow] Warning message is displayed if a user leaves initialization page without clicking initialize button after changing setup
[Flow] If section initializer is configured, Fixed Value type boundary value configured on boundary condition will not change the initialized values until re-initialization

[Flow] Base grid for Hex6 far-end boundary was slightly bigger than the Hex6
[Flow] Text filter in boundary condition list is now working
[Flow] Select Color and Opacity windows in display control were not modal windows
[Mesh] No-boundary geometries were shown in the list of boundaries in the boundary layer step
[Flow] Mesh could not be loaded after project creation
[Flow] Exception occurred when text is typed in the filter input in boundary conditions

[Flow] Monitoring for a point that is not snapped on a surface is not working in multi-region case

[Mesh] Castellation/Snap/BoundaryLayer operation can be cancelled during operation
[Mesh] Default name is applied for Geometry, Region, etc

[Flow] Mesh could not be loaded since v23.3.2
[Flow] Module path error in baramFlow.sh has been fixed
[Flow] MRFProperties file was not removed even when the property is turned off
[Flow][Mesh] Window could be out of sight when display configuration is changed in multiple screen environment

[Flow] Monitoring for a point that is not snapped on a surface is not working in multi-region case
[Flow] Text filter in boundary condition list is not working

[Flow] “Reference Pressure Location” has been moved to “General” page
[Flow] Boundary type is configured automatically according to the name of boundary
[Mesh] Geometry import dialog now goes to the latest used folder
[Mesh] “slipFeatureAngle” is configured as the half of featureAngle internally

[Flow] Monitoring for a point that is not snapped on a surface is not working in multi-region case

“BaramMesh” application for meshing job is added, and the name of “Baram” is changed to “BaramFlow” accordingly

Time foler name in scientific notation like “1e-5” is properly handled now
Monitoring for a point that is not snapped on a surface is now woring in single region case
Parallel processing configuration is clear now. It’s now not a configuration but an action to decompose/reconstruct
Chart shows all the data when a project opened
View alignment buttons on each Axis is simplified to one alignment button
“Paraview” path configuration menu has been added

Chart could not be shown with an exception of “ValueError: Axis limits cannot be NaN or Inf”
Residual chart was not shown for a copied project
Gravity could be configured only for Multi-phase(VoF) case
Initialization Parameters were not applied even though Initialization button was clicked if user stayed in the page
Atmospheric Wall was not shown in wall boundary condition

Monitoring for a point that is not snapped on a surface is not working in multi-region case
“save as” menu is not stable yet. Copy the project project manually